P5.95mm SMD HD Rental LED Screen

P5.954mm UHD Small Pixel Pitch Outdoor Rental LED Display ERALED Outdoor Rental LED display with newest die-casting aluminum cabinet is the industry leading Outdoor Rental LED display with newest die-casting aluminum cabinet is the industry leading rental LED display product with the advantage...

Send InquiryChat Now

P5.954mm UHD Small Pixel Pitch Outdoor Rental LED Display


Pixel    Pitch(Unit:mm)

5.954

Pixel    configuration/LED lamp's encapsulation type

2727

Scanning method

1/7

Pixel    density(Unit:pixels/㎡)

28208

Module Total    Resolution(L×H)(unit: pixel)

42×42

Module Total    Dimension(L×H)(unit: mm)

250×250

Module Total    Dimension(Unit:㎡)

0.0625

Cabinet Total    Dimension(L×H)(unit: mm)

500×500

Cabinet Total    Dimension(Unit:㎡)

0.25

Cabinet Total    Resolution(L×H)(unit: pixel)

84×84

Color Processing    Level(unit:bit)

16bit

Fresh    frequency(hz)

4800

Brightness:nits

7000

Module    Weight(unit:KG/module)

0.875

Module Maximum    Power Consumption(unit:W/module)

31.3

Module Maximum    Current(unit:A/module)

6.3

Cabinet    Weight(unit:KG/Cabinet )

6.8

P5.95mm LED Screen.jpg


3.jpg

ERALED Outdoor Rental LED display with newest die-casting aluminum cabinet is the industry leading Outdoor Rental LED display with newest die-casting aluminum cabinet is the industry leading rental LED display product with the advantage of:

Front and back dual side maintenance cabinet: Convenient to assemble and disassemble/ No need maintenance channel

Seamless and high precision, perfect flatness

Excellent heat dissipation

Fan less Quiet operation

High refresh, High contrast and High grayscale

Ultra-wide viewing angle

Multifunctional use cabinet design with compatible all the indoor and outdoor mainstream rental models including indoor rental P2.84,P2.98,P3.91,P4.81,P5.95,P6.25mm and outdoor rental P3.91mm, P4.81mm.

Features:

Sleek & Slim design

The cabinet is slim and rear design is smooth edged surface that makes you handle safely.

1.jpg
2.jpg





Innovative handle

Handle is innovative, grip and wide for easy handling.


UI LCD display

The rear box has LCD display that it shows voltage, temperature, cabinet usage timing for every time used and total hours of usage. Power and signal lamps indicates cabinet status.

3.jpg
4.jpg



Dual data connection

There is optional data connecting port on cabinets

under rear box, you can use it if standard one fails.

No Data & Power cable

Everything is connected with pin type socket. Cable free design makes it fast for installation and stable in data/power transmission.


5.jpg
6.jpg




Dual fixing module

The modules are fixed by magnet and by screw for fast assembling, and no tools required for installation.




Front & Rear Maintenance

It makes you remove the modules without

any tools and maintain the screen in front side as well as rear side easily.


7.jpg
8.jpg

Convenient for both

hanging and Stacking installation

Special structural design that helps you to install the screen

on ground or hanging without any tools.

Fast assembling & disassembling

No tools are required for installation of screen.

Super light: 40% lighter than conventional aluminum cabinet

Super slim: high-strength, more slim than conventional aluminum cabinet in the design, thinner around 30%;

Fast cooling: excellent heat dissipation performance to protect the module circuit

Anti-interference: Special anti-electromagnetic interference function

High-strength: tensile test to reach 300KG, more strength than conventional aluminum cabinet

Easy installation: Special fast lock, only need 20 second to complete the installation of one cabinet

High precision: seamless splicing after CNC processing, high precision die-casting cabinet achieves high flatness and seamless matching of the whole display.

High universality: Can be installed arbitrary hole machining, indoor and outdoor

Easy maintenance: front accessible maintenance available; Support for both front and rear maintenance.

High cost-effective: complete production and supply chain

Innovative handle: Handle is innovative, grip and wide for easy handling.

Short ROI: Super Light and slim which means Easy handle, transport and low cost of assemble and disassemble, which maximum your revenue with the lowest cost and shorten your ROI time

Uniform color and high contrast ensure clear and sharp picture.

Fan-less design with good dissipation guarantees noise-free effect.

High stability and reliability prolong the lifespan of LED display.

Energy saving:

50% energy saving with very low power consumption, low electricity fee, low heat generation, much longer lifetime, long lifetime high brightness and low failure pixels;

Wide application and short ROI:

High resolution, high brightness, energy saving advantages make it fit for various wide application, like: outdoor and indoor advertising, rental and events, staging and decoration, mobile truck vehicle advertising, poster advertising, government and commercial advertising; Sports Stadium live broadcasting and perimeter banner advertising for Football Stadium, Basketball Stadium, Baseball and Softball Stadium, Hockey Stadium, Aquatics and Natatorium Stadium; digital scoreboards, billboards and video displays, Message Displays, Audio Systems,etc.

High Contrast, High Frequency and high Color Capacity:

5000: 1 Contrast Ratioa very high level to ensure a vivid image of our LED displays system. 3840HZ High Frequencya very high level to ensure a non-flicking video rebroadcasting. 16 bit, 281 trillion color Capacity-a very high gray grade to create a vivid live video effect.

First-class LED chip:

Supplied by Next-generation Nichia LED from Japan, CREE LED from USA, Nationstar LED from China best LED Stock Listed Company to ensure high brightness, uniform colors and the long lifetime our LED display system.

Sun-Cutting Long-term high Calibrated Brightness and Brightness:

6000 nits brightness capacity throughout product lifetime of the LED display, creating the only true daylight viewable solution,ensuring Clear vivid image quality even in direct, full-on sunlight to ensure you attracts more audience to get short ROI of your LED display's investment.

Easy Installation, operation and servicing:

Easy and simple installation interface and user friendly software to ensure the user friendly interface of the LED display system.

Convenient maintenance:

Front and rear cabinet access make the maintain work very convenient and low cost to help you concentrate more time and energy on your main marketing promotion business.

24/7/365 Display Health:

Optional display monitoring increases display uptime and offers an immediate response should an error occur.

FAQ:

How to choose the LED Display ?

The LED Display purchase is a very professional look before purchasing these common problems will make you into the role as soon as possible.

Consider the factors of the Display area of the user site can allow

(1) effective line of sight with the actual site size;

(2) pixel size and resolution;

(3) units estimated for the base area;

(4) Display mechanical installation and maintenance of the operating space;

(5) The Display inclination on the distance.

Playback of user needs

(1) text: text size and differentiate demand;

(2) Video Display: 320 x 240 dot matrix;

(3) digital standard DVD: ≥ 640 × 480 dot matrix;

(4) complete computer video: ≥ 800 × 600 dot matrix;

Ambient light level for the brightness of the Display body requirements

The general brightness requirements are as follows:

(1) Indoor:> 800CD/M2

(2) semi-indoor:> 2000CD/M2

(3) outdoor (look northward):> 4000CD/M2

(4) Outdoor (faces south):> 8000CD/M2

Red, green and blue on a white composition brightness requirements

Red, green, blue and white purity aspects of the contribution is not the same. The fundamental reason is because the human eye's retina

Membrane caused by different wavelengths of light feel. After a number of experimental tests, the following approximate ratio, for the reference design:

Simple red, green and blue brightness ratio: 3:6:1

Exact red, green and blue brightness ratio: 3.0:5.9:1.1

High-end full-color display to use pure green

Actual LED Display production, should choose a high luminous efficiency and they can get rich vibrant color trichromatic

LED lamps, so that the chromaticity diagram in the color area of a triangle as much as possible in and close to the tongue-shaped spectrum of color curve to meet the rich color and the issue of sufficient brightness and tongue top-shaped curve for the 515nm wavelength light, so high-end LED Display selection of wavelength close to 515nm pure green light, LED tube, such as the selection of the LED lamp of 520nm, 525nm or 530nm wavelength light.

Clear luminance and dot density requirements under the conditions, the brightness of the computer is a single tube

Calculated as follows: (two red, one green, one blue, for example)

Red LED lamp brightness: brightness (CD) / M2 ÷ Points / M2 × 0.3 ÷ 2

The green LED brightness: brightness (CD) / M2 ÷ Points / M2 x 0.6

Blue LED lamp brightness: brightness (CD) / M2 ÷ Points / M2 × 0.1

For example: 2500 dots per square meter density 2R1G1B, per square meter brightness requirements for 5000 CD/M2 is:

The red LED lamp brightness: 5000 ÷ 2500 × 0.3 ÷ 2 = 0.3

The green LED brightness: 5000 ÷ 2500 × 0.6 ÷ 2 = 1.2

The blue LED lamp brightness: 5000 ÷ 2500 × 0.1 = 0.2

The brightness of each pixel: 0.3 × 2 +1.2 +0.2 = 2.0 CD

Full color Nichia tube with the use of domestic pipe in addition to price What is the difference between

(1) die: Nichia independent production of the die, the domestic pipes generally used die in the United States or Taiwan;

Package: (2) the Nichia independent package, domestic production plant, domestic pipe more packaging manufacturers;

(3) Consistency: Asian tube of the same batch of die wavelength difference between the smaller, consistency, domestic pipe consistency is relatively poor;

(4) Life: Asian tube life is relatively long, domestic tube attenuation more serious;

A control system can control the number of points?

Communication Display A card: monochrome, color, 1024 × 64

Communication Display B card: Monochrome: 896 × 512 two-color: 896 × 256

DVI-color Display: 1280 × 768

DVI Full Color: 1024 x 512

The display size design is generally considered to what factors

- There are three important factors in the design Display size:

(1) to display content;

(2) of floor space conditions;

(3) of the template size (indoor Display) or the pixel size of the display unit (outdoor Display).

-10 Kilowatts or more display should be added to buck the boot device.

- Communication: communication distance is long communication lines for the definition.

- To display models that are installed with the standard of the length of the communication lines to install the communications line.

- Prohibit the communication lines and power lines in the same line of tube alignment.

- Installation Requirements: about the installation of the display level, are not allowed backward

- Lifting to the installation of the upper and lower adjustment lever

- Wall mount mounted forward off the hook

- Floor installation and positioning support bolts.

Display power consumption indicators and power requirements

The power consumption of the display is divided into the average power consumption and maximum power consumption. The average power consumption, also known as power is usually the actual power consumption. The maximum power consumption is power consumption when the startup or full bright extreme cases, the maximum power consumption is the factor of the AC power supply (diameter, switches, etc.) must be considered. The average power consumption is generally 1/3 of the maximum power consumption.

The display is a large sophisticated electronic equipment for the safe use and reliable operation, AC220V power input, or in connection with the AC220V power input connected to the computer must be grounded.

Note: The computer AC220V power input ground is connected to the computer chassis.

Display installation requirements

Power requirements: power supply connection point should be within the size of the Display body

220V electricity supply, FireWire 0 line ground wire; 380V mains supply, three FireWire 10-line ground wire;

FireWire 0 line conductor cross-sectional area of the same; more than 10 kilowatts, the display should be added a buck to boot device.

The communication requirements: the communication distance is based on the communication line length defined.

To display models that are installed with the standard of the length of the communication lines to install communication lines. Communication lines and power lines is prohibited in the same ray tube alignment.

Installation Requirements: about the installation of the display level, do not allow backward

Lifting you want to install and adjust up and down the pole wall mount forward off the hook to be installed before the floor installation to increase the positioning studs.

The design and installation of the outdoor Display should consider what

The main problem of the outdoor Display as follows:

(1) display installed outdoors, often sun and rain, wind and dust cover, poor working conditions. Electronic equipment is wet or excessive moisture will cause a short circuit or even fire, causing the failure or fire, resulting in losses;

(2) The display may be subject to strong electric magnetic attacks caused by lightning;

(3) ambient temperature changes greatly. Display the work itself must produce a certain amount of heat, if the ambient temperature and heat but also bad, the IC may not work properly, and even burned, so that the display system does not work;

(4) wide audience, Far Sight Distance wide horizons requirements; ambient light changes, in particular, may be subject to direct sunlight.

The above special requirements, outdoor display must be:

(1) Display Display and construction of the junction must be strictly water leak; Display body must have good drainage measures, in the event of a smooth water emissions;

(2) lightning protection devices installed on the display and buildings. Display main body and the shell to maintain a good grounding resistance of less than 3 ohms, caused by lightning current discharge in a timely manner;

(3) to install ventilation equipment, cooling, Display the internal temperature between -10 ℃ ~ 40 ℃. The Display behind the top to install the axial flow fan, exhaust heat;

(4) The selection of operating temperature between -40 ℃ ~ 80 ℃ Industrial-level integrated circuit chip to prevent winter temperature is too low so that the display can not be started. ;

(5) In order to ensure the long-distance visible in strong ambient light, we must make use of ultra-high brightness light-emitting diodes;

(6) shows medium use of a new tube of wide viewing angle, wide viewing angle, color pure, coherent and coordinated, more than 100,000 hours life. Media outside the package is currently the most popular with cover along the square tube, silicone sealed, metallized assembly; the exquisite beauty of its appearance, sturdy and durable, with anti-direct sunlight, dust-proof, waterproof, high temperature, anti-short circuit. characteristics of the "defense".

1. Concept or define of the LED chip: LED chip is a semiconductor which can converts electric energy into visible light. The chemical compound used within an LED determines its color, brightness and power efficiency.

2. Concept or define of LED lamps: LED is short for 3 words: Light Emitting Diode

According to the LED chip's encapsulation type, LED lamps have several different types, like:

SMD(Surface Mountinging Device), DIP(Dual In Line package),Dot matrix, etc.

Generally speacking the LED lamps come in two basic forms:SMD and DIP.

SMD LED display is more and more popular since the Advantages of perfect: color blending capability, no color shift at extreme angles, much wider viewing angle comparing to DIP. More important reason why SMD is more popular is the resolution of SMD LED display is much higher than DIP LED display. For example, the smallest pixel for DIP LED display is 10mm. However, the smallest pixel pitch for SMD LED display is 3.2mm which means 9 times resolution higher than DIP LED displays. Furthermore, the SMD LED display is more energy saving and cost is also lower than DIP LED display

Acoording to the SMD LED's encapsulation size, SMD LED can be classified to several models, like: 0606 SMD,0808 SMD,0909 SMD,1010 SMD,1515 SMD, 2020 SMD,2121 SMD,3528 SMD,1921 SMD,2525 SMD,2727 SMD,3535 SMD,5050 SMD etc

SMD 1921, 2525, 2727, 3535, 5050 is used for outdoor waterproof models, others is used for indoor non-waterproof models.

Acoording to the SMD LED's encapsulation color:, SMD LED can be classified to Black LED lamps and white LEDs.

SMD Black LED lamps:

1.png

SMD white LED lamps:

2.png

Black SMD is 50% lower brightness, but can be viewed more clearly under the sunshine because the contrast ratio is higher, gray grade is higher as you can see from the below 2 SMD white LED display and SMD Black LED display's actual comparison under the sunshine condition.  Below picture to show: left is white SMD LED display, right is total black SMD LED display:

3.jpg

4.jpg

Each SMD LED lamp contains red, green and blue LED chip, meanwhile each DIP LED lamps only contains one color LED chip of either red color LED chip, green color LED chip or blue color LED chip.

Dual In Line LED lamps

5.png

Dual In Line LED lamps use a reflector cup and an epoxy lens package with dual legs, that is why it's called DIP. This combination as well as the type of chip used, plays a role in determining the elliptical viewing angle produced. A Dual In Line LED's reflector cup focuses the light emitted by the chip into a specific viewing area.

DIP LED display is very popular before the year of 2015, 90% of outdoor full color LED video display were made of DIP LED lamps. However, SMD LED display taking place of the DIP LED lamps rapidly after the year of 2016. Nowadays, 95% of the full color LED display is made of SMD LED lamps.

3. Concept or define of LED pixel: Pixel is short for picture elements, are points of light that illuminate to form letters, words, graphics, animations and video images. One pixel can be made up of a single LED lamp, multiple LED lamps of the same color or multiple LED lamps of different colors. They are the smallest elements of the electronic display system that can be individually controlled and turned off or on at various brightness levels. Pixel is also called dot, is also the most basic and smallest unit of resolution. For example, when we say HD, UHD resolution: normally refers to how many pixels or dots in length and how many pixels or dots in height. HD means the resolution should be 1920 pixels in length, 1080 pixels in height. UHD means the resolution should be 3840 pixels in length, 2160 pixels in height, or even 7680 pixels in length, 4320 pixels in height. LED pixel is also the basic and smallest unit of LED module since each module is composed by a certain amount of LED pixels.

4.Concept or define of pixel pitch: pixel pitch means the distance between the 2 most close neighboring pixels in line and column. For example, if the distance between the 2 closest neighboring pixels in line and column is 8mm and 3mm, then we call this LED display model: pixel pitch Indoor Rental LED display . Pixel Pitch is normally just called PH, or P. So, PH8mm equals to P8mm.

5.Concept or define of LED module: LED module is the basic unit of LED cabinet which were composed by a certain amount of LED pixels.

6.Concept or define of LED cabinet: LED cabinet is basic unit of LED display which were composed by a certain amount of LED modules.

7.Concept or define of LED display: LED display is the final product which were composed by a certain amount of LED cabinets.

8.Concept or define of LED display models: all the LED display products' model is normally classified and defined by the pixel pitch. ERALED display products' Pixel pitch typically ranges from 1.2mm up to 20mm for indoor and outdoor LED displays. Our indoor LED display model list: P1.25mm, P1.562mm, P1.667mm, P1.875mm, P1.923mm, P2.0mm, P2.5mm, P2.88mm, P2.98mm, P3mm, P3.91mm, P4mm, P4.81mm, P5mm, P5.95, P8mm,P6.25mm; Our outdoor LED display model list: P3mm, P3.2mm, P3.338mm,P3.91mm, P4mm, P4.81mm, P5mm, P5.95, P8mm,P6.25mm, P6.8mm, P6.667mm, P8mm, P10mm, P10.68mm, P12mm, P18mm, P20mm.

Pixel pitch directly correlates your display resolution and optimal viewing distance. The smaller the pixel pitch, the higher the pixel density, the higher the resolution, the more pixels used to make up the image on your display, thus improving the resolution and optimal viewing distance. What does this mean in more simple and plain terms? The smaller the pixel pitch, the closer a viewer can stand to your display and still have a very good image quality.

Theoretically speaking, the smaller pixel pitch, the better. However, we are living in the realistic world which have many limitations, especially the resources and money. The smaller pixel pitch LED display always have better image quality, but also increase the cost since the smaller the pixel pitch, the higher the pixel density, the higher the LED lamps quantity needed. Each LED lamps is not so expensive. However, when the pixel pitch is very small, like 1.25mm pixel pitch, each square meter LED display area need 640000 LED lamps which is more than half a million LED lamps. So the cost is also extremely high! So, even 1.25mm pixel pitch indoor LED display and 3.2mm pixel pitch outdoor LED display is the smallest pixel pitch LED display among all models. However, 98% customer still choose other bigger pixel pitch LED display to match their demand and balance their ROI time. For example, using 1.875-8mm pixel pitch indoor LED display and 3.91-10mm pixel pitch outdoor LED display. By having a smaller pixel pitch, you increase the number of LED pixels for your display. The more LED pixels in your display, the higher your expense. You can cut your costs and still have a fantastic display by going with a larger pixel pitch if your audience isn't too close to your screen. If your display is in a space where your target audience will be closer to the display screen, such as in a shopping mall's retail environment, a 1.2-2.5 mm pixel pitch LED display is probably better suited to your needs. If you are hanging your display higher and in turn further from your target, for a project such as airport signage, a 2.5-5mm pixel pitch LED display may be best for you.

9. Concept or define of LED display resolution? LED display resolution is defined by how many pixels or dots in length and how many pixels or dots in height on the physical area of the LED display. HD LED display means the resolution should be 1920 pixels in length, 1080 pixels in height. UHD LED display resolution means the resolution should be 3840 pixels in length, 2160 pixels in height, or even 7680 pixels in length, 4320 pixels in height. Resolution is mainly determined by pixel pitch and LED display size. The smaller the pixel pitch, the higher the resolution; the larger the LED display size, the higher the resolution. So, there's 2 ways to increase the LED display resolution: using smaller pixel pitch technology or increasing the LED display size: When the LED display pixel pitch is certain, then increasing the LED display size to increase the resolution; When the LED display size is certain, then using smaller pixel pitch LED display size to increase the resolution.

10. Concept or define of the viewing distances:Viewing distances are calculated based on the display type and the distance from the display. Each display will have a minimum and a maximum viewing distance that may vary based on application and intended use. A large character will have a longer viewing distance while a small character will have a shorter viewing distance. ERALED uses 50 feet for every one inch of character distance as a general point of reference. Character spacing, also known as pixel pitch, will vary between indoor and outdoor display applications.

11. Concept or define of LED display viewing angle: the viewing angle is the viewing angle where the measured light intensity is 50% of its maximum value(seeing from the middle front). Measuring brightness or luminosity is done by using a spectroradiometer. Spectroradiometers typically take measurements of spectral irradiance and spectral radiance, which spectral data can be used to calculate luminosity (cd/m²). When choosing a display, consider where it will be installed and the angle at which the display will be viewed. Image quality will be at it's best within the viewing angle of the display—where your primary intended audience should be located. Readability angle or viewing angle will normally exceed the optimum viewing angle depending on site-specific circumstances and ambient light conditions.

6.png

How to choose the LED Display ?

The LED Display purchase is a very professional look before purchasing these common problems will make you into the role as soon as possible.

Consider the factors of the Display area of the user site can allow

(1) effective line of sight with the actual site size;

(2) pixel size and resolution;

(3) units estimated for the base area;

(4) Display mechanical installation and maintenance of the operating space;

(5) The Display inclination on the distance.

Playback of user needs

(1) text: text size and differentiate demand;

(2) Video Display: 320 x 240 dot matrix;

(3) digital standard DVD: ≥ 640 × 480 dot matrix;

(4) complete computer video: ≥ 800 × 600 dot matrix;

Ambient light level for the brightness of the Display body requirements

The general brightness requirements are as follows:

(1) Indoor:> 800CD/M2

(2) semi-indoor:> 2000CD/M2

(3) outdoor (look northward):> 4000CD/M2

(4) Outdoor (faces south):> 8000CD/M2

Red, green and blue on a white composition brightness requirements

Red, green, blue and white purity aspects of the contribution is not the same. The fundamental reason is because the human eye's retina

Membrane caused by different wavelengths of light feel. After a number of experimental tests, the following approximate ratio, for the reference design:

Simple red, green and blue brightness ratio: 3:6:1

Exact red, green and blue brightness ratio: 3.0:5.9:1.1

High-end full-color display to use pure green

Actual LED Display production, should choose a high luminous efficiency and they can get rich vibrant color trichromatic

LED lamps, so that the chromaticity diagram in the color area of a triangle as much as possible in and close to the tongue-shaped spectrum of color curve to meet the rich color and the issue of sufficient brightness and tongue top-shaped curve for the 515nm wavelength light, so high-end LED Display selection of wavelength close to 515nm pure green light, LED tube, such as the selection of the LED lamp of 520nm, 525nm or 530nm wavelength light.

Clear luminance and dot density requirements under the conditions, the brightness of the computer is a single tube

Calculated as follows: (two red, one green, one blue, for example)

Red LED lamp brightness: brightness (CD) / M2 ÷ Points / M2 × 0.3 ÷ 2

The green LED brightness: brightness (CD) / M2 ÷ Points / M2 x 0.6

Blue LED lamp brightness: brightness (CD) / M2 ÷ Points / M2 × 0.1

For example: 2500 dots per square meter density 2R1G1B, per square meter brightness requirements for 5000 CD/M2 is:

The red LED lamp brightness: 5000 ÷ 2500 × 0.3 ÷ 2 = 0.3

The green LED brightness: 5000 ÷ 2500 × 0.6 ÷ 2 = 1.2

The blue LED lamp brightness: 5000 ÷ 2500 × 0.1 = 0.2

The brightness of each pixel: 0.3 × 2 +1.2 +0.2 = 2.0 CD

Full color Nichia tube with the use of domestic pipe in addition to price What is the difference between

(1) die: Nichia independent production of the die, the domestic pipes generally used die in the United States or Taiwan;

Package: (2) the Nichia independent package, domestic production plant, domestic pipe more packaging manufacturers;

(3) Consistency: Asian tube of the same batch of die wavelength difference between the smaller, consistency, domestic pipe consistency is relatively poor;

(4) Life: Asian tube life is relatively long, domestic tube attenuation more serious;

A control system can control the number of points?

Communication Display A card: monochrome, color, 1024 × 64

Communication Display B card: Monochrome: 896 × 512 two-color: 896 × 256

DVI-color Display: 1280 × 768

DVI Full Color: 1024 x 512

The display size design is generally considered to what factors

- There are three important factors in the design Display size:

(1) to display content;

(2) of floor space conditions;

(3) of the template size (indoor Display) or the pixel size of the display unit (outdoor Display).

-10 Kilowatts or more display should be added to buck the boot device.

- Communication: communication distance is long communication lines for the definition.

- To display models that are installed with the standard of the length of the communication lines to install the communications line.

- Prohibit the communication lines and power lines in the same line of tube alignment.

- Installation Requirements: about the installation of the display level, are not allowed backward

- Lifting to the installation of the upper and lower adjustment lever

- Wall mount mounted forward off the hook

- Floor installation and positioning support bolts.

Display power consumption indicators and power requirements

The power consumption of the display is divided into the average power consumption and maximum power consumption. The average power consumption, also known as power is usually the actual power consumption. The maximum power consumption is power consumption when the startup or full bright extreme cases, the maximum power consumption is the factor of the AC power supply (diameter, switches, etc.) must be considered. The average power consumption is generally 1/3 of the maximum power consumption.

The display is a large sophisticated electronic equipment for the safe use and reliable operation, AC220V power input, or in connection with the AC220V power input connected to the computer must be grounded.

Note: The computer AC220V power input ground is connected to the computer chassis.

Display installation requirements

Power requirements: power supply connection point should be within the size of the Display body

220V electricity supply, FireWire 0 line ground wire; 380V mains supply, three FireWire 10-line ground wire;

FireWire 0 line conductor cross-sectional area of the same; more than 10 kilowatts, the display should be added a buck to boot device.

The communication requirements: the communication distance is based on the communication line length defined.

To display models that are installed with the standard of the length of the communication lines to install communication lines. Communication lines and power lines is prohibited in the same ray tube alignment.

Installation Requirements: about the installation of the display level, do not allow backward

Lifting you want to install and adjust up and down the pole wall mount forward off the hook to be installed before the floor installation to increase the positioning studs.

The design and installation of the outdoor Display should consider what

The main problem of the outdoor Display as follows:

(1) display installed outdoors, often sun and rain, wind and dust cover, poor working conditions. Electronic equipment is wet or excessive moisture will cause a short circuit or even fire, causing the failure or fire, resulting in losses;

(2) The display may be subject to strong electric magnetic attacks caused by lightning;

(3) ambient temperature changes greatly. Display the work itself must produce a certain amount of heat, if the ambient temperature and heat but also bad, the IC may not work properly, and even burned, so that the display system does not work;

(4) wide audience, Far Sight Distance wide horizons requirements; ambient light changes, in particular, may be subject to direct sunlight.

The above special requirements, outdoor display must be:

(1) Display Display and construction of the junction must be strictly water leak; Display body must have good drainage measures, in the event of a smooth water emissions;

(2) lightning protection devices installed on the display and buildings. Display main body and the shell to maintain a good grounding resistance of less than 3 ohms, caused by lightning current discharge in a timely manner;

(3) to install ventilation equipment, cooling, Display the internal temperature between -10 ℃ ~ 40 ℃. The Display behind the top to install the axial flow fan, exhaust heat;

(4) The selection of operating temperature between -40 ℃ ~ 80 ℃ Industrial-level integrated circuit chip to prevent winter temperature is too low so that the display can not be started. ;

(5) In order to ensure the long-distance visible in strong ambient light, we must make use of ultra-high brightness light-emitting diodes;

(6) shows medium use of a new tube of wide viewing angle, wide viewing angle, color pure, coherent and coordinated, more than 100,000 hours life. Media outside the package is currently the most popular with cover along the square tube, silicone sealed, metallized assembly; the exquisite beauty of its appearance, sturdy and durable, with anti-direct sunlight, dust-proof, waterproof, high temperature, anti-short circuit. characteristics of the "defense".


Hot Tags: P5.95mm SMD HD rental LED screen, China, manufacturers, suppliers, factory, price
Related Products
Inquiry