C3 Player

C3 LED Player Overview As a new generation of LED controller, C3 can control LED screen without computer, it is convenient and cost-efficient. C3 adopts the embedded operating system, which is small, secure and stable. It can work in a tough environment. C3 has been widely used in advertisers...

Send Inquiry

C3 LED Player

Overview

As a new generation of LED controller, C3 can control LED screen without computer, it is convenient and cost-efficient.

C3 adopts the embedded operating system, which is small, secure and stable. It can work in a tough environment.

C3 has been widely used in advertisers display and digital signage, etc.

1.jpg2.jpg

Features

QQ截图20170905102921.jpgMaximum loading capacity: 655360 pixels;

QQ截图20170905102921.jpgMaximum Width: 4096 pixels, Maximum Height: 1536 pixels;

QQ截图20170905102921.jpg8G memory, support maximum external 128GB storage;

QQ截图20170905102921.jpgEdit contents by LEDVISION, support program schedule, multiple programs play ;

QQ截图20170905102921.jpgSupport program page multi-window arrangement, freely set the window size and position, and support window overlapping;

QQ截图20170905102921.jpgRich media formats such as video, image, text, office, clock, weather etc.

QQ截图20170905102921.jpgSupport high speed configuration through USB cable;

QQ截图20170905102921.jpgSupport content publishing to U disc by LEDVISION, U disc plug-and-play;

QQ截图20170905102921.jpgProgram management and update through the USB line or fast Ethernet port.

Specifications


Basic Parameters

Hardware

1.4GHz quad-core CPU
Quad-core GPU
1GB@1066MHz DDR3
1080P HD Hardware decoding

Memory

8GB (System occupied 2.5G), external U disc supported

Loading Capacity

Maximum loading capacity: 655360 pixels; maximum width: 4096 pixels, maximum height: 1536 pixels

Receiving Card Supported

All Colorlight receiving cards

Interfaces

Ethernet Output

Output signal to receiving cards

Audio Output

1/8″ (3.5mm)TRS

CONFIG Port

Set screen parameters, content transmission

USB Ports

USB2.0*2, support external storage (U disc or SD card, 128GB in maximum) or communication equipment

Ethernet Input

Access LAN (WAN not supported)

DC Power Supply

Standard 5V-12V input

Physical Parameters

Dimension

128.5*103.6*28.3mm

Working Voltage

DC 5V-12V

A/C Adapter

AC 100~240V 50Hz

Rated Power

6W

Weight

0.23kg

Working Temperature

-20℃~85℃

Environmental Humidity

0-95% without condensation

File Format

Program Schedule

Support multiple Program play in sequence, support Program timing play

Program partition

Support program windows splice, overlapping

Video Format

AVI, WMV, MPG, RM/RMVB, MOV, VOB, MP4, FLV, etc. Support multiple videos play at the same time.

Audio Format

MPEG-1 Layer III,AAC, etc.

Image Format

Bmp, jpg, png, etc.

Text Format

Txt, rtf, word, ppt, excel, etc.

Text Display

Single Line Text, Static Text, Multi-Line text, etc.

Play Window

4 Video windows, multiple text/picture windows, scrolling text, scrolling image, LOGO, Date/Time/Week, weather. Flexible screen split, different contents in each window

OSD

Support 32bit OSD, support video/text/picture mixture or overlap, and available for fully transparent, opaque, translucent effects.

RTC

Real-time Clock Display and Management

Terminal Management & Control

Communication System

access LAN

Content Update

U disc plug-and-play; Management terminal transmission

Management Devices

PC, Android, iOS smart terminals

Ethernet Control

Real-time brightness adjustment; Screen switch on/off; System parameters configuration; Content play control

Timing Switch on/off

Set through LEDVISION

Software

LEDVISION 4.20/higher version

Hardware


6.jpg

Interface Description



No.

Name

Functions

1

Indicator Light

Yellow light flashes when sigal detected;
Green light is bright when power is normal

2

Ethernet Output

RJ45, signal output , connecting with receiving cards

3

Audio Output

HIFI stereo output

4

CONFIG Port

Setting parameters, content transmission , screen info read back

5

USB*2

updating content

6

Ethernet Input

100M input Ethernet, connecting PC with LAN

7

Power Supply Port

DC 5V/2A


Dimension

Unit: mm

4.png

CONTENT

Chapter 1 C3 Interfaces Introduction............................................................................................................................. 1

Chapter 2 Operation Environment.................................................................................................................................. 2

Chapter 3 Screen Parameter Settings............................................................................................................................ 4

Chapter 4 Program Editing and Publishing..................................................................................................................... 7

4.1 Program Editing.................................................................................................................................................. 8

4.2.1 Publish Program to C3 directly........................................................................................................................ 9

4.2.2 Publish Program to USB stick........................................................................................................................ 11

Chapter 5 Setting of C3................................................................................................................................................ 15

5.1 Basic Settings................................................................................................................................................... 15

5.2 Advanced Settings............................................................................................................................................ 17

Chapter 6 Extendable Functions ................................................................................................................................. 18

5.1 External Audio Module...................................................................................................................................... 18

5.2 External WiFi Module....................................................................................................................................... 19

Chapter 1 C3 Interfaces Introduction

1.1 C3 Interface

8.jpg

No

Interface

Function

1

LED DISPLAY

Connect with LED screen (connect to receiving card)

2

CONFIG

Connect with PC for parameters setting and update contents

3

USB1/2

Update and play content through USB stick; External module interface

4

Indicator Light

Indicate power and signal status

5

Power

DC 5V/2A

Chapter 2 Operation Environment

Supported system: C3 only can run under windows 7/8/10, not support windows XP.

Supported software: LEDVISION, 4.20 version or higher version is recommended.

You can download the LEDVISION software from Colorlight's official website www.lednets.com, then complete the installation according to the steps below.

Run the software package, and select [ English ] → [ OK ]

10.jpg

Click [ Browse ], then choose the installation location, then click[ Next ],Choose components according to your own computer status, click [ Install ] to complete.

1.png

Chapter 3 Screen Parameter Settings

1. Before connecting C3 to your computer, please make sure you have already set up the screen by Gigabit Ethernet port correctly so that you can play program perfectly.

2. After making sure the screen is set up OK, then connect the C3 and screen by Ethernet port, connect the C3 and PC by"Config"port.

3.png

3. Open the software, click[ setting ] →[ Software setting ]→[ i series mode ].

1.png

2.png

Then click[ Control ] on menu → [ Screen Control ], then select [ C-Series Play Box ] in Select Sending Device.

QQ截图20170905104310_01.gif

QQ截图20170905104310_02.gif

4. Power on C3, then click [Detect the play boxes] and [Detect receiver cards] to make sure the connection is OK.

Note: If you do not complete this step, LEDVISION may not function properly because of a conflict between Net Card mode and C3 config interface.

Chapter 4 Program Editing and Publishing

1.Click [ Publish Program to C Series Play boxes ] to enter program publish interface.

3.jpg

2.Right click [ Direct USB ] and then choose [ Refresh ], your C3 will show up in the program publishing window, select your device to set parameters and choose what content to play.

1.jpg

4.1 Program Editing

When you open LEDVISION, you will see [ LED1 ] in program editing area. Right-click [ LED1 ] to add [ normal page ], you can add [ file window ] in [ normal page ], then add [ image ] and [ video ] under the [ file window ] to add media or asynchronous play.

QQ截图20170905104737(001).jpg

4.1.1 Publish program to C3 directly

① In [ program editing area ], after finishing content editing, select the [ program page ] that you are going to publish;

② Click [ C3 ] and then right-click to choose [ Publish Program to current play box ].

You must rename the content and allow it to finish uploading to fully publish your program.

10.jpg

4.1.1 Publish program to C3 directly

① In [ program editing area ], after finishing content editing, select the [ program page ] that you are going to publish;

② Click [ C3 ] and then right-click to choose [ Publish Program to current play box ].

You must rename the content and allow it to finish uploading to fully publish your program.

50.jpg

4.1.2 Publish Program to USB stick

1. To begin publishing through USB, first plug your USB stick to the PC USB port. Please notice that you can publish the program independently (No need to connect screen with PC or C3, only USB and PC)

Click [ Publish Program to C Series Play boxes ] to enter program publishing window.

20.png

Note: USB stick should be empty before publishing for best performance. Remove previous update contents before using it to update or play new contents, so as to avoid any problems.

2. Software will automatically identify USB stick when plug, click [ U Disk ] then choose [ Your USB's Drive ].

60(001).jpg

① Choose USB Stick Mode:

● Play program from USB stick ( The program only will be sent to USB stick, while disconnect the USB stick with C3, the screen will play program from C3 automatically; the content won't be stored in C3).

● Upload program from USB stick ( Plug the USB stick to C3, the program on USB stick will be stored in C3, while the program on C3 before will be remove).

●Select [ program page ]→ right click your USB stick→ [ Publish the current program to the selected disk],then rename the program, click [ OK ] to publish.

●Plug the USB stick to C3.

70.jpg

If choose [ Play program from USB stick ] before, then the C3 will play program from USB-disk directly.

If choose [ Upload program from USB stick ] before, the screen will show like upper right picture.

Note: A rotating circle in LED upper left corner will appear during the upload procedure. You may unplug the USB drive after the circle disappears.

Chapter 5 Setting of C3

5.1 Basic Settings

● Ensure LED display is under normal configuration before setting on C3 parameters. ● When setting up C3 parameters, you can connect your C3 to your PC through a standard USB A/B cable, and connect your C3 to your LED screen through network cable.

1. Play Box Date and Time: Click [ Modify ] to set up date and time, or time zone as well.

2. Alarm Settings: Set wake up and sleeping time, which works once checked.

3. Play box Time: Display the setting time.

Running Time: Calculated once C3 sender is powered on.

Capacity/Remain: View memory utilization.

4. Power on, Sleep, Restart: To perform C3 sender box operation like power on, sleep and restart once clicked.

5. Playing: Use the drop down menu to play programs.

Program Management: Check, delete and choose program, and much more.

The surface development of your C3's parameter setting interface is shown below:

1.jpg

5.2 Advanced Settings

① Screen Resolution

The [ width ]/ [ Height ] you input must be equal to or slightly larger than the actual screen resolution.

② Output

Every Frame ( Default ).

Every Other Frame ( Choosing [ every other frame ] can help avoid lag when image loading area is too large ).

③ Control Area

Select [Custom] in control area, and modify the values according to your network interface control area, click [Apply] to complete setting.

2.png

Chapter 6 Extendable Functions

Note: Restart C3 after all the external devices finishing installation, so as to enable extendable function.

5.1 External Audio Module

Connect audio module to C3 under C3 power off status, and connect sound equipment to audio module, then power C3 on.

Note: Do not unplug the audio module during C3 playing, otherwise it will cause C3 stuck (Back to normal after restart).

1.png2.png

5.2 External WiFi Module

Connect wifi module to C3 under C3 power off status, and then power on C3.

① WIFI

In the network tab, check WIFI, input your WiFi login information for [ network name ] and [ password ].

Click Apply and then Refresh, you can check connection status by clicking Details

② WiFi Hotspot

Input your [ network name ] and [ password ];

[ CDMA mode ]: 2.4G;

[ Channel ]: 14 choices, to avoid network overload.

11.jpg

Hot Tags: C3 player, China, manufacturers, suppliers, factory, price
Related Products
Inquiry