P10mm HD LED Display

Super light: 40% lighter than conventional aluminum cabinet Super slim: high-strength,more slim than conventional aluminum cabinet in the design,thiner around 30%; Fast cooling: excellent heat dissipation performance to protect the module circuit Anti-interference: Special anti electromagnetic...

Send Inquiry

P10mm UHD Small Pixel Pitch Indoor LED Display

Pixel Pitch(Unit:mm)

10

Pixel configuration/LED lamp's encapsulation type

3528

Scanning method

1/4

Pixel density(Unit:pixels/㎡)

10000

Module Total Resolution(L×H)(unit: pixel)

32×16

Module Total Dimension(L×H)(unit: mm)

320×160

Module Total Dimension(Unit:㎡)

0.0512

Cabinet Total Dimension(L×H)(unit: mm)

640×640

Cabinet Total Dimension(Unit:㎡)

0.4096

Cabinet Total Resolution(L×H)(unit: pixel)

64×64

Color Processing Level(unit:bit)

16bit

Fresh frequency(hz)

4800

Brightness:nits

1300

Module Weight(unit:KG/module)

0.384

Module Maximum Power Consumption(unit:W/module)

20.5

Module Maximum Current(unit:A/module)

4.1

Cabinet Weight(unit:KG/Cabinet )

10.2

P10mm725(001).jpg

P10mm726.jpg

Super light: 40% lighter than conventional aluminum cabinet

Super slim: high-strength,more slim than conventional aluminum cabinet in the design,thiner around 30%;

Fast cooling: excellent heat dissipation performance to protect the module circuit

Anti-interference: Special anti electromagnetic interference function

High-strength: tensile test to reach 300KG,more strength than conventional aluminum cabinet

Easy installation: Special fast lock,only need 20 second to complet the installation of one cabinet

High precision: seamless splicing after CNC processing, High precision die-casting cabinet achieves high flatness and seamless matching of the whole display.

High universality: Can be installed arbitrary hole machining, indoor and outdoor

Easy maintenance: front accessible maintenance available; Support for both front and rear maintenance.

High cost-effective: complete production and supply chain

Innovative handle: Handle is innovative, grip and wide for easy handling.

Short ROI: Super Light and slim which means Easy handle, transport and low cost of assemble and disassemble, which maximum your revenue with the lowest cost and shorten your ROI time

Uniform color and high contrast ensure clear and sharp picture.

Fan-less design with good dissipation guarantees noise-free effect.

High stability and reliability prolong the lifespan of LED display.

P10mm2212.jpg

Sleek & Slim design

The cabinet is slim and rear design is smooth edged surface that makes you handle safely.

1.png




Innovative handle

Handle is innovative, grip and wide for easy handling.

Support for both front and rear maintenance.

Uniform color and high contrast ensure clear and sharp picture.

High precision die-casting aluminum panel achieves high flatness and seamless matching of the whole display.

Fan-less design with good dissipation guarantees noise-free effect.

Light and slim panel is easy to handle and transport.

High stability and reliability prolong the lifespan of LED display..
2.png

1(001).jpg

2(001).jpg

3(001).jpg

4(001).jpg

Experience the difference via ultra wide viewing angle

160 degree horizontal and vertical viewing angle: always the most natural and clear image no matter seeing from which direction

5(001).jpg

6(001).jpg

7(001).jpg

How much does a LED display or LED Display cost?

The price or cost of a LED display, LED Display or electronic billboard depends on two variables. Those two variables are the total size of the LED display, and the total resolution of the LED display.

The total size of the LED display: The bigger or larger the LED display the higher the cost. The prices are based on USD/sqm, which means that if the total size is 24sqm, the price will be 24 multiplied by the cost per sqm.

The total resolution of the Display: The more pixels, or the more number of LED´s, the Display has the higher the cost will be. For example if a Display is 12sqm and has 49,000 pixels, it will be cheaper if the LED display is 12sqm with 120,000 pixels. This is because more LED lamps will be placed onto the Display which is a higher cost. But on the other hand the more LED´s the Display has, the higher the detail will be of the videos and images that the LED display will be publishing.

Why LED display have different costs and prices?

Everything depends on the customers´ needs. Some customers want the public to see their LED display from a distance of 10 meters and further, and others from 20 meters and further. The more resolution/sqm a Display has the closer will be the viewing distance without loosing detail looking at the Display from closeby. For that we always need the client to answer us several questions to determine the right LED display size and resolution and come with the right proposal. Nothing is predetermined, but based on the needs of the client.

If you want to know what are our prices per square meter please let us know and give us a call, or contact us by writing an email or online chat. We can send you our prices and you can figure out what will be the right size and right resolution for your LED display that fits your budget.

What is the refresh rate for LED display?

The refresh rate of a LED display is the number of times in a second that the LED display hardware draws the data. This is distinct from the measure of frame rate in that the refresh rate for LED display includes the repeated drawing of identical frames, while frame rate measures how often a video source can feed an entire frame of new data to a display.

For example, most movie projectors advance from one frame to the next one 24 times each second. But each frame is illuminated two or three times before the next frame is projected using a shutter in front of its lamp. As a result, the movie projector runs at 24 frames per second, but has a 48 or 72 Hz refresh rate.

Increase refresh rate for decreasing LED display flickering

On LED display, increasing the refresh rate decreases flickering, thereby reducing eye strain. However, if a refresh rate is specified that is beyond what is recommended for the LED display, damage to the display can occur.

Normally our LED display of ERALED LED display have a refresh rate of over 300Hz, which is more than 5 times the refresh rate of a normal cathode television which is 50Hz (PAL and SECAM) or 60Hz (NTSC). For football stadiums (stadium LED display and perimeter LED display) our LED display can reach a refresh rate of over 800Hz, which means that they won´t show any flickering when recorded with a video camera and broadcasted live on television.

What is the life time for our LED display?

The life time for our LED display is over 100,000 hours, but it depends how the client is taking care of his LED display and how it is used. When a LED display´ life time will get to 100,000 hours, it means that the brightness of the LED´s of the LED display is about 50% of it´s original brightness, depending on several factors that will enlarge a LED display´s life time or reach 100,000 hours.

The most important factors are, which are:

LED display Maintenance

LED display Temperature

LED display Power Protection

LED Chip Packaging

LED display Maintenance

Maintenance is a very important factor, dusty environments require more often maintenance to the LED display than clean environments. The soldering of the LED chips can dry out and break which require changing often pieces like LED modules and receiving cards.

LED display Temperature

The temperature of the LED display is very important to keep it cool. In hot environments it is wise to install a cooling system inside the LED display to avoid overheating.

LED display Power Protection

Electrical peaks can put more force on the electrical components which will decrease life time. It is wise to install a protection that can control the peaks.

LED Chip Packaging

The LED chip packaging material is also a very important variable that will determine the lifetime of a LED display. For example iron has less life than cuprum LED packages. Besides iron is more corrosive than cuprum.

The Effective Control Distance Of LED Display and LED display

In this article, we will explain the effective control distance of full color LED Display and LED display signals transferred with a normal network cable. Generally, the signal cable of a LED Display is RJ45 which is a standard network cable. The control distance can reach up to 100m, which is enough for most clients needS. A LED display will be installed with a structure, the function of which is not only to back up the LED Display and decoration, but also, there will be a small control room inside the LED display structure or nearby the LED display structure where a PC will be placed to control the LED display.

Economic LED display Controlling

The most economic way for controlling a LED display is using the basic RJ45 signal cable. But for some special clients, they will not place the control PC nearby the LED Display , because it's not convenient for them to edit and program the content nearby the LED Display . Those clients will request for a longer control distance. In this condition, a fibre-optic solution will be chosen. And in this way, the control distance from the LED display to control room where the controlling computer is placed can reach up to 10Km, or even more. This will bring a relative high cost which won't make it an economic solution.

Usually for LED display and LED Display that will be controlled over a long distance, an internet connection can be choosen too. This only applies if an internet connection is available for both locations to control the LED Display and to control the PC. We recomment to control the LED display remotely by the internet of course.

LED Display Controlling Remotely

For most application, the signal from the controlling PC to the LED Display is transferred via a RJ45 cable. The distance of 100m is normally far than enough for most clients enough for most clients' requirements and most economic way. But some clients would like to control the display in a further distance than 100m, or even thousands of Km. For these cases the remote control by internet will be chosen.

For to realize controlling remotely the LED display by internet you need the following:

The internet connection ror both locations, for the LED display as well as for the controlling PC;

Two PC's, one for to place at the LED display and the other one to control the LED display remotely.

At last, we will introduce the signal transfer in a simple way. For most people it's not strange to know that one PC can control another PC through internet. And the essential of LED Display remote control is the same. But our software will combine and set the control in a convenient method. And the operator will easily control the display from quite a far distance. For the detailed information please ask our sales for the manual of control system.


Hot Tags: P10mm HD LED display, China, manufacturers, suppliers, factory, price
Related Products
Inquiry